Potassium hydroxide is currently used in many industries, of course, in order to better play its effect, it should be operated properly, so we come to understand a problem -- can potassium hydroxide be dissolved in water?
A small amount of alkali will not splash after dissolving. When dissolving, you must add alkali in water, stop adding water to alkali. It is recommended that you use plastic materials. If a fixed volume is required, less water should be used, dissolved and cooled before using a constant volume of water. In the process of potassium hydroxide dissolution as shown, potassium hydroxide can be added to water while stirring to avoid local overheating of the product until the product is dissolved.
In the process of dissolving potassium hydroxide, if the product is added too much, the reaction will be more violent, and the product will easily overflow. Therefore, you must pay attention to safety, take protective measures, and perform this operation on the premise of not endangering your personal safety.
In addition, potassium hydroxide products are highly corrosive, and there are special requirements for their protection. Workers on the job are vulnerable to product hazards, so these employees are required to wear protective clothing and work before starting work, and the company also needs safe showers and eye washing equipment. Do not touch damaged containers and spills until appropriate protective clothing is worn.
Cut off the leakage source as far as possible, cover the leakage point with plastic cloth, reduce scattering; Take care to keep water out of the container. Collect the leakage with a clean shovel and place it in a clean, dry container with a loose lid. Remove the container away from the leaking area.
In short, potassium hydroxide dissolved in water is actually a very dangerous operation, if you need to use this process, you should do a good job in advance, personal safety is the most important. For more information, please visit www.hnwlcs.com.